MANLI M-TV002 DRIVER DOWNLOAD

This depends on the bandwidth of the signal. I'm running Ubuntu In this article, I show you how you can make your Linux distribution I used Debian Sarge, but other distros should work too, as long as you have a 2. SAA is a popular chip for tuner cards. Untar the software package. For television sound, use , or I also produced a user-space program to control it.
Uploader: Neshura
Date Added: 25 April 2009
File Size: 35.29 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 90479
Price: Free* [*Free Regsitration Required]





Manli tv tuner m tv002

Once you have put your package into the kernel, your kernel is ready to start tuning in. Lower frequency reception may need a different antenna.

You could also potentially record sounds off the device, and stream it to other enthusiasts across the Internet, and even decode pager messages but check that this is legal in your country before you try, especially if you are going to post about it!

A good way to do this is to look up spectrum licenses with the government body that allocates frequencies if that information is readily available.

Manli M-TV001/TV002 - VideoHelp Capture Card

I'm running Ubuntu Mt-v002 you have a TV capture card in your computer, you probably already have all the hardware you need to listen in on much more than just TV and radio only software changes are needed.

However, I have produced a modified kernel driver which will let you tune to arbitrary frequencies.

You can also get lists for many countries from scanner clubs in your country. The hardware will also allow you to hear emergency services, taxi and freight radios, UHF citizen band radio, aircraft transmissions, and more. It needs to be attached to a tuner such as the FI For television sound, useor k-tv002 To tune into a radio frequency, you need to give two parameters: I can tune into that by using.

This depends on the bandwidth of the signal.

SAA cards list — The Linux Kernel + documentation

In this article, I show you how you can make your Linux distribution I used Debian Sarge, but other distros should work too, as long as you have a 2. Now that you've got it working, here's a helpful hint, especially if you are getting poor reception: You can filter out distracting low frequency noise using the highp filter anything below 50Hz is just distracting, and doesn't help much in identifying what they are saying.

Go up a level in the software package, and type make. SAA is a popular chip for tuner cards. Hi guys, before you tell me it's illegal, and I shouldn't be doing this etc.

Go into the kernel subdirectory of the package, and then type: For example, one of the Central 1 Police frequency is The antenna that came with your card is probably not very good, so consider investing in at least a bunny's ear antenna.

I also produced a user-space program to control it.

Manli tv tuner m tv @ Drivers Index

Another option would be just to try all frequencies in a certain range until you hit something. You also need to install the kernel source corresponding to the kernel on your system most distros come with maanli kernel source package.

The standard kernel driver, however, is not suitable for tuning into anything other than TV, because it has a limited set of tuner frequencies which it looks for at the detection stage. Now, you need to remove any saa package you might have on your system, and replace it with m-t002 module you just compiled.

The exact range of frequencies you will have access to depends on the specific tuner you have. Grab the maanli package from here. Turn off sound direct to the sound-card using a mixer program, and use a program like sox to process your sound as it goes from manlii to dsp.

Even if you get the station frequency right, getting this one right is almost as important, or you won't hear much.

Managed to get the kernel package from elsewhere. Most other FM radio signals use a narrower band, and generally works well. You can do that like this you must be root first:

Comments